SHMLDT350 | Stronghand 30/ 60/ 90deg. Inside/Outside Magnet 
- Combo Pack 

Inside / Outside Angle Magnets 
Hold stock using the Inside or Outside edges! 

Hold stock from the outside, leaving clearance for inside welds, or hold stock from the inside for outside welds. 

• Hold and position sheet metal, round pipes, square, angled or flat stock. 
• The Inside / Outside Angle Magnets are constructed from two independent rectangular magnets for consistent, undiminished magnetic force when both sides are attached to workpieces. 
• Use mounting holes to link two magnets together for use as fixturing elements. 
• Use hex hole on magnet for breakaway leverage. 

• Descrition: Fixed Angle. Combo Pack: include 1 x SHMLD300 + 1 x SHMLD500 
• SHMLD300 
• Angles: 90°(30°,60°) 
• Height: 75.5mm 
• Width: 52mm 
• Thickness: 14mm 
• Mag. Pull Force: 9kg 

• SHMLD500 
• Angles: 90°(30°,60°) 
• Height: 125mm 
• Width: 85mm 
• Thickness: 18mm 
• Mag. Pull Force: 15kg