DESCRIPTION:

Easy to use, polyethylene pumps syphon liquids to lower levels than the height at which the pump is installed. These are easy to prime & start within 6-7 strokes. Pump requires no further operation & keeps working in Auto position, emptying the media being pumped. All pumps are equipped with a Vent Cap on top. Opening the cap stops the discharge.

To dispense media at levels higher than the pump, pump bellow needs to be continuously operated.

Supplied complete with Flexible Corrugated Discharge tube.

Discharge: 6.5 LPM / 2 GPM

Bung: 1-1/2" for use with pails

Fits: 5 - 20 litre / 5 gal. pails

Discharge Hose Length: 21.69" (551 mm)

RECOMMENDED USE

Water-based fluids, detergents, waxes, soaps, antifreeze, some mild acids, and other liquids compatible with pump materials of construction

Pump should only be used with light weight & non-flammable liquids

DO NOT USE

With any media not compatible with materials used in the pump construction.

These pumps must never be used with concentrated acids, Acetone, Benzene etc