Packed in heavy-duty vinyl rolls for easy access, organization and storage.

 

• Manufactured to the highest safety standards, cold chisels are individually forged from high quality alloy steel.

• The alloy content in these makes them ideal for all types of metalworking and masonry applications and also increases wear resistance significantly.

• The precisely ground cutting edge is induction hardened (52 – 58 HRC) to give improved performance over longer periods of time.

• Hardness at the striking end is maintained to under 42 HRC, so that the head will not splinter when subject to hammer blows.

• Shank is powder coated and the cutting edge is accurately ground.

 

Measurements =Blade Width X Overall Length

 

Set Contents Listed Below

 

 

Octagonal Cold Chisels

 

CHS/ST/6/1-2

Blade Width: 1/2 inch (13mm)

Stock Size: 7/16 inch (11mm)

Overall Length: 6 inch (150mm)

 

CHS/ST/6-5/5-8

Blade Width: 5/8 inch (16mm)

Stock Size: 1/2 inch (13mm)

Overall Length: 6.1/2 inch (163mm)

 

CHS/ST/7/3-4

Blade Width: 3/4 inch (19mm)

Stock Size: 5/8 inch (16mm)

Overall Length: 7 inch (175mm)

 

 

Centre Punches - Heavy Duty

 

CP/HD/5-32/SPL

Blade Width: 5/32 inch (4mm)

Stock Size: 5/16 inch (10mm)

Overall Length: 5.1/2 inch (125mm)

 

 

Pin Punches - Heavy Duty

PP/HD/1-8

Blade Width: 1/8 inch (3mm)

Stock Size: 5/16 inch (8mm)

Overall Length: 4.3/4 inch (119mm)

 

PP/HD/3-16/SPL

Blade Width: 3/16 inch (5mm)

Stock Size: 5/16 inch (8mm)

Overall Length: 5.1/4 inch (132mm)

 

PP/HD/1-4

Blade Width: 1/4 inch (6mm)

Stock Size: 3/8 inch (10mm)

Overall Length: 5.3/4 inch (145mm)

 

Starting Punches - Heavy Duty

 

SGP/HD/3-16

Blade Width: 3/16 inch (5mm)

Stock Size: 3/8 inch (10mm)

Overall Length: 5 inch (125mm)